Fixon Fiber Filler is a reinforced body filler containing fiberglass strands, ideal for repairing large holes, rusted panels, and damaged plastics. It offers superior strength and adhesion compared to standard fillers.
Directions for Use
Preparation: Sand the surface (P80–P120 for steel, polyester laminates, 2K acrylic filler, and old paint coatings; lightly mat for aluminium). Remove all dirt, grease, oils, and waxes, and ensure the area is completely dry before application.
Mixing: Place the desired amount of filler on a clean, non-fibrous mixing board. Add a ribbon of cream hardener from edge to edge across a 10cm puddle of filler (2–3% by weight). Mix thoroughly until a uniform colour is achieved.
Application: Immediately after mixing, apply a thin layer over the repair area, avoiding air entrapment. Apply 1–2 coats, allowing drying time between coats. Setting time is approximately 5–7 minutes at ambient temperature.
Finish: Sandable in 20–40 minutes. Sand with P120–P220. Fixon Ultra Fine Filler can be applied afterwards, followed by primer if required.
Storage: Never return mixed filler to the can. Keep cool and store in a cool place.
